Send documentation comments to nexus6kdocs@cisco.com.
2-15
Cisco Nexus 6000 Series Hardware Installation Guide
OL-15902-01
Chapter 2 Installing the Cisco Nexus 6000 Series Switches
Installing A Reverse Airflow System for Norcal-96
Caution When converting the system airflow direction, the fan louvers must be removed and rotated 180 degrees
so that the airflow direction arrows on top of the louvers match the configuration.
Fan louver installation is shown in Figure 2-3.
Figure 2-3 Fan louver inslallation
To install a fan louver, follow these steps:
Step 1 Engage the latch into the bottom slots.
Step 2 Push the handle until the top latch snaps in.
To remove a fan louver, follow this step:
Step 1 Hold the handle and pull towards you.
To Next Page
Loading...
