Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
128 lb (12.7 kg)Cisco Nexus 9332D-GX2B Chassis (N9K-C9332D-GX2B)
6—
0.26 lb (0.12 kg)
Fan Module
– Port-side intake (burgundy) (NXA-SFAN-35CFM-PI)
2 (1 for
operations
and 1 for
redundancy)
—
2.64 (1.2 kg)
Power Supplies
– 1500-W AC port-side intake (burgundy) (NXA-PAC-1500W-PI)
– 1100-W DC port-side intake (burgundy) (NXA-PDC-1100W-PI)
Transceiver and Cable Specifications
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Note
Heat Dissipation
Requirement
Maximum Power
Consumption (AC or
DC)
Typical Power
Consumption (AC or DC)
Switch
4,920.308 BTUs
per hour
1442 W638 WCisco Nexus 9332D-GX2B
Power Specifications
Power specifications include the specifications for each type of power supply module.
1100-W DC Power Supply Specifications
These specifications apply to the following power supplies:
Cisco Nexus 9332D-GX2B ACI-Mode Switch Hardware Installation Guide
44
System Specifications
Switch and Module Weights and Quantities
To Next Page
Loading...
