Cisco Nexus 9332D-GX2B - DC Power Cable Specifications; Regulatory Standards Compliance Specifications

DC Power Cable Specifications
PhotoDescriptionPart ID Number
The 1100W DC power
supply
(NXA-PDC-1100W-PE/PI)
is shipped with a
connector already plugged
into the power supply.
Use 8 AWG wire with the
minimum input voltage of
40VDC, based on
maximum current and
thermal derating.
NXA-PDC-1100W-PE/PI
Regulatory Standards Compliance Specifications
The following table lists the regulatory standards compliance for the switch.
Table 2: Regulatory Standards Compliance: Safety and EMC
DescriptionSpecification
Products should comply with CE Markings according to directives 2004/108/EC
and 2006/95/EC.
Regulatory compliance
• CAN/CSA-C22.2 No. 60950-1 Second Edition
• CAN/CSA-C22.2 No. 62368-1-19 Third Edition
• NRTL 60950-1 Second Edition
• IEC 62368-1
• EN 62368-1
• AS/NZS 62368-1
• GB4943
• UL 62368-1
Safety
Cisco Nexus 9332D-GX2B ACI-Mode Switch Hardware Installation Guide
47
System Specifications
DC Power Cable Specifications