Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
118.8 lb (8.5 kg)Cisco Nexus 9336C-FX2 Chassis
(N9K-C9336C-FX2)
3—
0.6 lb (0.3 kg)
0.6 lb (0.3 kg)
Fan Module
– Port-side exhaust (blue)
(NXA-FAN-65CFM-PE)
– Port-side intake (burgundy)
(NXA-FAN-65CFM-PI)
2 (1 for operations and 1 for
redundancy)
—
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
Power Supply module
– 1100-W AC port-side exhaust
(blue) (NXA-PAC-1100W-PE2)
– 1100-W AC port-side intake
(burgundy)
(NXA-PAC-1100W-PI2)
– 1100-W HVAC/HVDC port-side
exhaust (blue)
(NXA-PUV-1100W-PE)
– 1100-W HVAC/HVDC port-side
intake (burgundy)
(NXA-PUV-1100W-PI)
– 1100-W DC port-side exhaust
(blue) (NXA-PDC-1100W-PE)
– 1100-W DC port-side intake
(burgundy) (NXA-PDC-1100W-PI)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see https://www.cisco.com/
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power consumed by the switch, and it lists the maximum
amount of power that you must provision from the power source as input to the power supply and switch for
peak conditions.
Cisco Nexus 9336C-FX2 NX-OS Mode Switch Hardware Installation Guide
40
System Specifications
Switch and Module Weights and Quantities
To Next Page
Loading...
