Cisco Nexus 9372PX - 1 Introduction; Document Conventions; Audience; Switch Details

4 Cisco Nexus 9372PX Switch Configuration Guide for Dell PS Series SANs | SCG3665
1 Introduction
This document illustrates how to configure a Cisco
®
Nexus 9372PX switch for use with Dell™ PS Series
storage using Dell EMC best practices.
Note: For more information on PS Series SAN design recommendations, see the Dell PS Series
Configuration Guide.
1.1 Document conventions
Table 1 lists the formatting conventions used in this document.
Document conventions
Format
Description
Example
Bold
User input
Dell>enable
Italic
Placeholder or variable
ip address
Bold italic
User input (variable)
Dell>my password
<Italic> <brackets>
Separate variables
<ip address> <mask>
1.2 Audience
This switch configuration guide describes a verified configuration following Dell EMC best practices for a
dedicated PS Series iSCSI SAN and is intended for storage or network administrators and deployment
personnel.
1.3 Switch details
Table 2 provides an overview of the switch configuration.
Switch specifications
Cisco Nexus 9372PX
Switch vendor
Cisco
Switch model
Nexus 9372PX
Switch firmware
7.0(3)I5(2)
Note: For proper functionality, the switch must be at the firmware version shown in Table 2 before
proceeding with this configuration. Using previous firmware versions may have unpredictable results.
Note: The latest firmware updates and documentation can be found at: www.cisco.com. This site requires a
login credential.