To Next PageTo Next Page
Need help?Do you have a question about the Cisco Nexus 9372TX and is the answer not in the manual?
Describes the intended audience for the document, including hardware installers and network administrators.
Explains conventions used in the document for commands, text formatting, and syntax.
Lists other relevant Cisco Nexus 9000 Series NX-OS software and hardware documentation.
Provides information on how to provide technical feedback or report errors in the document.
Guides users on how to get more documentation and submit service requests.
Introduces the Cisco Nexus 9372TX and 9372TX-E NX-OS Mode Switches.
Details the acceptable ambient temperature ranges for the switch operation.
Specifies the relative humidity levels the switch can tolerate during operation and non-operation.
Explains the importance and methods of establishing a proper earth-ground connection for the switch.
Describes the airflow directions (intake/exhaust) and their impact on switch placement.
Highlights critical safety instructions, warnings, and definitions for installation.
Step-by-step guide for physically mounting the switch into a rack or cabinet.
Provides instructions on how to properly ground the switch chassis for safety.
Guide on connecting power and initiating the switch startup sequence.
Instructions for establishing a serial console connection for initial configuration.
Steps to connect to the switch's management port for network access.
Guide on connecting switch interface ports to external network devices.
Detailed steps for installing QSFP+ transceivers into the switch ports.
Instructions for replacing a single fan module while the switch is operating.
Guide for replacing one power supply module while the other remains operational.
Steps to safely remove an AC power supply module from the chassis.
Instructions for installing a new AC power supply module into the chassis.
Describes the status and color meanings of the BCN, STS, and ENV LEDs on the switch chassis.
Explains the status indicator LED on the fan modules.
Details the status indicators and combinations for the power supply modules.
Lists and illustrates the contents included in the standard accessory kit.
A checklist of tasks for planning site preparation for switch installation.
Worksheet to record essential information about the switch chassis and installed modules.
General