4-3
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
add-snmp-mgr
add-snmp-mgr
To add or modify an SNMP manager entry on the system, use the add-snmp-mgr command.
add-snmp-mgr manager-ip
Syntax Description
Defaults None
Command Types Changes configuration
Command Modes Master password protected
Command History
Usage Guidelines The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications.
No notifications are sent unless at least one SNMP manager address is configured. The
Cisco ONS 15501 accepts a maximum of 10 IP managers.
Examples The following example shows how to add an SNMP manager entry on the system.
edfa > add-snmp-mgr 10.1.2.71
Related Commands
manager-ip Specifies the IP address of the host running the SNMP manager.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
del-snmp-mgr Deletes an SNMP manager entry on the system.
get-snmp-mgr Displays an SNMP manager entry on the system.
To Next Page
Loading...