Cisco ONS 15501 - Del-Snmp-Mgr

4-7
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
del-snmp-mgr
del-snmp-mgr
To delete an SNMP manager entry on the system, use the del-snmp-mgr command.
del-snmp-mgr manager-ip
Syntax Description
Defaults None
Command Types Changes configuration
Command Modes Master password protected
Command History
Usage Guidelines The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications.
No notifications are sent unless at least one SNMP manager address is configured.
Examples The following example shows how to delete an SNMP manager entry on the system.
edfa > del-snmp-mgr 10.1.2.71
Related Commands
manager-ip Specifies the IP address of the host running the SNMP manager.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
add-snmp-mgr Adds or modifies an SNMP manager entry.
get-snmp-mgr Displays SNMP manager entry information.