4-15
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
hide-trap
hide-trap
To hide the trap message, use the hide-trap command.
hide-trap
Syntax Description
Defaults None
Command Types Changes configuration
Command Modes User password protected
Command History
Examples The following example shows how to hide the trap message.
edfa > hide-trap
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
show-trap Displays the trap message.
To Next Page
Loading...