Cisco ONS 15501 - Outattn

4-25
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
outattn
outattn
To display the measured output attenuation, use the outattn command.
outattn
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Usage Guidelines The value for optical output attenuation is displayed in dB.
Examples The following example shows how to display the measured output attenuation.
edfa > outattn
0.00 (dB)
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.