Cisco ONS 15501 - Timezone

4-57
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
timezone
timezone
To display or modify the timezone of the system, use the timezone command.
timzone [zone]
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Usage Guidelines See Appendix C, “Time Zone Codes,” for a list of time zones and correlating abbreviations.
Examples The following example shows how to display the timezone of the system.
edfa > timezone
GMT
The following example shows how to modify the timezone of the system.
edfa > timezone PST
Related Commands
zone Specifies the time zone at which to set the system.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
set-time Sets the time of the system.
time Displays the time of the system.