Cisco PenTeleData 8800 Series Administration Guide

Allocate a Key Expansion Module Type
You can assign the type of key expansion module that the phone supports:
• BEKEM
• CP-8800-Audio
• CP-8800-Video
Before you begin
• Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Att Console.
Step 2 Set the KEM Type field as described in the General, on page 340 table.
Step 3 Press Submit All Changes.
Allocate a Key Expansion Module Type with the Phone Menu
You can assign the type of key expansion module that the phone supports.
Procedure
Step 1 Press Applications .
Step 2 Select User preferences > Attendant console preferences > KEM type.
Step 3 Select the key expansion module type.
Step 4 Press Save.
Reset the Single LCD Screen Key Expansion Module
If you are having technical difficulties with your Cisco IP Phone 8800 Key Expansion Module, you can reset
the module to the factory default settings.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
119
Hardware and Accessory Installation
Allocate a Key Expansion Module Type

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English