Cisco PenTeleData 8800 Series Administration Guide

CHAPTER 8
Wall Mounts
• Wall Mount Options, on page 123
• Non-Lockable Wall Mount Components, on page 123
• Non-Lockable Wall Mount Components for Phone with Key Expansion Module, on page 130
• Adjust the Handset Rest, on page 136
Wall Mount Options
The following wall mount options are available:
• Cisco IP Phone 8800 Series Wall Mount Kit: A nonlockable wall mount kit available for the Cisco IP
Phone 8800 Series. This wall kit applies to Cisco IP Phone 8811, 8841, 8851, and 8861. The PID is
CP-8800-WMK=.
• Cisco IP Phone 8800 Series Wall Mount Kit with Single KEM: The kit is installed on the Cisco IP Phone
8851, and 8861 with one attached Cisco IP Phone 8800 Key Expansion Module. The PID is
CP-8800-BEKEM-WMK=
Non-Lockable Wall Mount Components
This section describes how to install the Cisco IP Phone 8800 Series Wall Mount Kit.
The following figure shows the components of the Cisco IP Phone 8800 Series Wall Mount Kit.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
123

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English