Cisco PenTeleData 8800 Series Administration Guide

DescriptionParameter
Removes caller ID blocking on all outbound calls.
Defaults to *68.
Block CID Deact Code
Removes caller ID blocking on the next inbound call.
Defaults to *81.
Block CID Per Call Act Code
Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block CID Per Call Deact Code
Blocks all anonymous calls.
Defaults to *77.
Block ANC Act Code
Removes blocking of all anonymous calls.
Defaults to *87.
Block ANC Deact Code
Enables the do not disturb feature.
Defaults to *78.
DND Act Code
Disables the do not disturb feature.
Defaults to *79.
DND Deact Code
Makes all outbound calls secure.
Defaults to *16.
Secure All Call Act Code
Makes all outbound calls not secure.
Defaults to *17.
Secure No Call Act Code
Makes a secure call.
Default: *18.
Secure One Call Act Code
Disables secure call feature.
Default: *19.
Secure One Call Deact Code
The star code used for paging the other clients in the
group.
Defaults to *96.
Paging Code
The star code used for parking the current call.
Defaults to *38.
Call Park Code
The star code used for picking up a ringing call.
Defaults to *36.
Call Pickup Code
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
299
Cisco IP Phone Troubleshooting
Vertical Service Activation Codes

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English