Cisco PenTeleData 8800 Series Administration Guide

Multiple Paging Group Parameters
DescriptionFeature
Enter a string to configure group paging and priority paging (out of band paging) that
doesn’t require the phone registration.
Group Paging Script
LDAP
DescriptionParameter
Choose Yes to enable LDAP.
Default: No
LDAP Dir Enable
Enter a free-form text name, such as “Corporate Directory.”
Default: Blank
Corp Dir Name
Enter a fully qualified domain name or IP address of an LDAP
server in the following format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5 authentication
method is used.
Default: Blank
Server
Specify a starting point in the directory tree from which to search.
Separate domain components [dc] with a comma. For example:
dc=cv2bu,dc=com
Default: Blank
Search Base
Enter the distinguished name domain components [dc]; for
example:
dc=cv2bu,dc=com
If you are using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the client DN
follows:
cn=”David Lee”,dc=users,dc=cv2bu,dc=com
cn=”David Lee”,dc=cv2bu,dc=com
username@domain is the client DN format for a Windows server
For example, DavidLee@cv2bu.com
Default: Blank
Client DN
Enter the username for a credentialed user on the LDAP server.
Default: Blank
User Name
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
315
Cisco IP Phone Troubleshooting
Multiple Paging Group Parameters

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English