Cisco Certified Products for Rack Integration and Approved
Third-Party Racks
Cisco Certified UCS Products for Rack Integration
Contact Cisco for the latest list of certified equipment. See the Cisco Certified Equipment for Rack Integration
document.
You must use an Approved Rack and specified UCS integration hardware; otherwise the Cisco warranty is
void.
Note
Third-Party Approved Racks
The following third-party rack is approved for preracking and preintegrating UCS products:
• Rittal TS IT Dynaload - 24U 600mm wide x 1200mm deep, including shock pallet
Cisco R42612 Rack and RP-Series Metered Input PDU Installation Guide
86
Integrating UCS Components in the Dynamic Rack
Cisco Certified Products for Rack Integration and Approved Third-Party Racks
To Previous Page
Loading...
Need help?
General