APPENDIX A
Specifications
This chapter contains the following sections:
• Rack Specifications, on page 49
• PDU Specifications, on page 50
Rack Specifications
The following table lists the specifications for the Cisco R42612 R-Series rack.
Table 6: Specifications
Dynamic (Preracked with
Side Panels)
Expansion (Static without
Side Panels)
Standard (Static with side
panels)
Cisco R42612 Rack
79.25 x 23.94 x 50.51 in.
(2013 x 608 x 1283 mm)
79.25 x 23.50 x 50.51 in.
(2013 x 597 x 1283 mm)
79.25 x 23.94 x 50.51 in.
(2013 x 608 x 1283 mm)
Dimensions (H x W x D)
86.4 x 46.4 x 57.4 in.
(2195 x 1180 x 1460 mm)
84.25 x 32 x 54.84 in.
(2140 x 813 x 1393 mm)
84.25 x 32 x 54.84 in.
(2140 x 813 x 1393 mm)
Dimensions (H x W x D)
with packaging
29.19 in. (741.5 mm)29.19 in. (741.5 mm)29.19 in. (741.5 mm)Distance from front
mounting rail to rear
mounting rail
359.35 lb (163 kg)264.55 lb (120 kg)339.51 lb (154 kg)Weight
705.48 lb (320 kg)335.10 lb (152 kg)410.06 lb (186 kg)Weight with packaging
YesNoYesSide panels included
42 RU42 RU42 RUEquipment mounting
capacity
2700 lb (1224.7 kg) of IT
gear
3000 lb (1360.8 kg) of IT
gear
3000 lb (1360.8 kg) of IT
gear
Static load capacity
Cisco R42612 Rack and RP-Series Metered Input PDU Installation Guide
49
To Next Page
Loading...
Need help?
General