Cisco RV132W - Cisco RV132 W Router Features; Front Panel Indicators

Cisco RV132W ADSL2+ Wireless-N VPN Router Quick Start Guide 3
Cisco RV132W Features
Front Panel
Power Solid green when the device is powered on and booted.
Flashing green when the device is booting or loading the
firmware.
Solid red when the device fails to reboot, or system error,
or is in firmware recovery mode.
Off when the device is powered off.
Internet Off when the ADSL2+/WAN LED is OFF.
Solid green when the device has a DSL WAN IP or
Ethernet WAN IP connection.
Flashing green when the device is sending or receiving
data through the DSL WAN.
Solid red when the device has no DSL WAN IP or
Ethernet WAN IP connection.
ADSL2+/
Ethernet
WAN
Off when the device is powered off or the device is
configured to use ADSL2+/Ethernet WAN yet has no
ADSL2+/Ethernet link.
Solid green when the DSL link has been activated.
Flashing green when the device is negotiating with the
DSLAM.
Solid blue when the Ethernet link is on.
Flashing blue when the device is transmitting/receiving
through Ethernet WAN.
LAN (1-3) The numbered lights correspond to the LAN ports on the
back panel.
Solid green when the corresponding port is connected to
a device. Flashing green when the port is sending or
receiving data.
WLAN 2.4G Off when the 2.4GHz wireless module is disabled.
Flashing green when the wireless radio is transmitting or
receiving data.
Solid green when the 2.4GHz wireless module is enabled.
2