Smart Network Application (SNA)
Overlays
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 674
29
PoE Information
The PoE overlay displays the power supply and consumption status of the elements in the
network.
This overlay applies colors to links based on the amount of power provided by the link to
power supplying devices based on their remaining power. The overlay also highlights devices
requesting power that are not receiving the power requested. The user can select the thresholds
where these colors change for each type of data, and the specific colors used for each threshold
reached.
An icon is added to power-supplying switches, and is colored according to the switches power
budget consumption.
• Device supplying 0-80% of its power budget — Normal
• Device supplying 81-95% of its power budget — Yellow
• Device supplying 96-100% of its power budget — Red
Devices receiving power over Ethernet are surrounded by a halo.
Connections containing at least one link over which power is supplied are highlighted in the
topology map.
In the connection explorer, each link transferring power displays an indication of providing
power, and the direction of the power flow. This indication is displayed per port, even if the
link is in a LAG. It is possible that some links in a LAG provide power while others do not.
VLAN Membership
This overlay enables viewing of the VLAN memberships of various ports and devices in the
network.
To Next Page
Loading...
