Cisco SG550XG-24F User Manual

Administration
Routing Resources
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 74
5
• Interfaces (2 TCAM entries per interface)—Count is the number of IP addresses on
interfaces on the device and TCAM Entries is the number of router TCAM entries
being used for the IP addresses.
• Routes (1 TCAM entry per route)—Count is the number of routes recorded on the
device and TCAM Entries is the number of router TCAM entries being used for the
routes.
• Total—Displays the number of router TCAM entries which are currently being used.
• Maximum Entries—Select one of the following options:
- Use Default—Use default values.
- User Defined—Enter a value.
IPv4 Multicast Routing Resources
• IPv4 Multicast Routes (2 TCAM entries per route)—Count is the number of
Multicast routes recorded on the device and TCAM Entries is the number of TCAM
entries being used for the Multicast routes.
• Maximum Entries—Select one of the following options:
- Use Default—Use default values.
- User Defined—Enter a value.
IPv4 Policy Based Routing Resources
• IPv4 Policy Based Routes (4 TCAM entries per route)—Count is the number of
Multicast routes recorded on the device and TCAM Entries is the number of TCAM
entries being used for the Multicast routes.
• Maximum Entries—Select one of the following options:
- Use Default—Use default values.
- User Defined—Enter a value.
IPv6 Routing Resources
• Neighbors (x TCAM entries per neighbor)—Count is the number of neighbors
recorded on the device and TCAM Entries is the number of TCAM entries being used
for neighbors.
• Interfaces (x TCAM entries per interface)—Count is the number of interfaces on the
device and TCAM Entries is the number of TCAM entries being used for the
interfaces.

Cisco SG550XG-24F Specifications

General

Brand	Cisco
Model	SG550XG-24F
Category	Switch
Language	English