Cisco SNS 3515 User Manual

Front Panel LEDs
• Off—The hard drive is operating properly.
• Amber—Drive fault detected.
• Amber, blinking—The device is rebuilding.
•
Amber, blinking with one-second
interval—Drive locate function activated.
Hard drive fault
• Off—There is no hard drive in the hard drive
tray (no access, no fault).
• Green—The hard drive is ready.
• Green, blinking—The hard drive is reading or
writing data.
Hard drive activity
• Off—There is no AC power to the server.
• Amber—The server is in standby power mode.
Power is supplied only to the Cisco IMC and
some motherboard functions.
• Green—The server is in main power mode.
Power is supplied to all server components.
Power button/LED
• Off—The unit identification function is not in
use.
• Blue—The unit identification function is
activated.
Unit identification
Cisco Identity Services Engine Hardware Installation Guide, Release 2.0.1
4
Install Cisco ISE Software on the SNS 3515 and SNS 3595 Appliances
Cisco SNS 3500 Series Appliances

Cisco SNS 3515 Specifications

General

Brand	Cisco
Model	SNS 3515
Category	Server
Language	English