Cisco SPA 301 - Chapter 9: Configuring the Cisco SPA 500 S Attendant Console

9
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 186
Configuring the Cisco SPA 500S Attendant
Console
The Cisco SPA 500S is a 32-button attendant console for the Cisco SPA 500
Series IP Phones. The Cisco SPA 500S works in both SIP and SPCP mode. The
Cisco SPA 500S connects to the phone with the attachment arm provided (not
shown). It obtains power directly from the phone and does not require a separate
power supply. Two Cisco SPA 500S units can be attached to a single phone to
monitor a total of 64 separate lines.
For more information about installing and configuring the Cisco SPA 500S with a
Cisco SPA 9000 system, see the
Cisco SPA 9000 Voice System Installation and
Configuration Guide
.
This chapter contains the following sections:
• Configuring the Cisco SPA 9000 for the Cisco SPA 500S, page 189
• Configuring the BroadSoft Server for the Cisco SPA 500S, page 189
• Configuring the Asterisk Server for the Cisco SPA 500S, page 190
• Configuring the Cisco SPA 500S, page 191
• Unit/Key Configuration Scripts, page 192
• Attendant Console Parameters, page 196
• Monitoring the Cisco SPA 500S, page 197