Cisco SPA509G Reference Guide

REFERENCE
i
SNET: CISCO SPA500G SERIES REFERENCE GUIDE 4
Back to Table of Contents
CISCO SPA500G SERIES PHONE OVERVIEW (CONT.)
CONNECTING YOUR PHONE
Your system administrator will likely connect your new Cisco IP Phone to the corporate IP telephony network. If that is not the case,
refer to the graphic and table below to connect your phone.
6 Navigation button Press an arrow to scroll left, right, up, or down through items shown on the LCD screen. (Not available on the Cisco
SPA501G.)
7 Messages button Press to access voice mail (must be set up by your phone system administrator).
8 Hold button Press to place a call on hold.
9 Setup button Press to access a menu to configure features and preferences (such as your directory and speed dials), access your call
history, and set up functions (such as call forwarding).
For the Cisco SPA501G, accesses the Interactive Voice Response menu, which allows you to perform tasks like getting the
IP address of the phone.
10 Mute Button Press to mute or unmute the phone. When phone is muted, the button glows red. A flashing mute button indicates the
network connection cannot be found.
11 Volume button Press + to increase the volume and - to lower the volume of the handset, headset, speaker (when the handset is off the
phone, or ringer volume (when the handset is on the phone).
12 Headset button Push to turn the headset on or off. When the headset is on, the button glows green.
13 Speaker button Push to turn the speaker on or off. When the speaker is on, the button glows green.
14 Keypad Use to dial phone numbers, enter letters, and choose menu items.
DESCRIPTION FUNCTION

Cisco SPA509G Specifications

General

Brand	Cisco
Model	SPA509G
Category	Telephone
Language	English