Need help?Do you have a question about the Cisco CP-8865 and is the answer not in the manual?
General| Resolution | 800 x 480 pixels |
|---|---|
| Camera | No |
| Protocols Supported | SIP, SCCP |
| Wall Mountable | Yes |
| HD Voice | Yes |
| Speakerphone | Yes |
| Display | 5 inch color display |
| Audio | Wideband audio |
| Connectivity | Ethernet, Wi-Fi, Bluetooth |
| Power over Ethernet | Yes |
| USB Ports | 2 USB ports |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Headset Jack | Yes |
| Codec Support | G.711, G.722, G.729, iLBC |
| Network Ports | 2 x 10/100/1000 Ethernet ports |
| Security | SRTP, TLS, HTTPS |
| Weight | 3.3 lbs (1.5 kg) |
Important instruction that the phone must be installed on-site and not shipped with the enclosure.
Considerations for wall support, suitable screws, and installation by qualified personnel per regulations.
Details the contents of various accessory kits, including driver bits, screws, and mounting hardware.
Lists required tools and outlines the sequential steps for securely mounting the backbox to a wall.
Instructions to disconnect the handset and connect power/network cables through the mounting bracket.
Steps to lower the phone mount, align the camera, and route cables through the designated exit.
Detailed wiring guide for connecting handset wires to the J4 terminal block of the USB to Analog Audio Module.
Procedure for grounding the backbox assembly from Electrostatic Discharge (ESD) using a ground lug.
Instructions for installing faceplates, reconnecting factory disconnected items, and verifying all cable connections.
Procedure for grounding the faceplate and securing it to the assembly using ground wires and a twist nut.
Detailed dimensions, hole sizes, and features of the backbox, faceplates, and mounting hardware.
Guide on how to peel protective film and secure acrylic bezels for the camera and front panel.
To Next Page
