Cisco SX10 User Manual

33
D1509707 User Guide
Cisco TelePresence TRC 6
Produced: April 2016 for CE 8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Settings
Gain Access to the Settings
The System information page
provides information on IP address,
MAC address, SIP Proxy, software
version installed and device name.
The system can be restarted from
here and setup wizard is available
via Advanced settings.
About Settings
To gain access to the Settings
menu, navigate to the upper
left corner of the screen and
press OK on the remote
control. Then navigate down
to System Information (number
two from the bottom of the
menu) and press OK again.
The Settings shows basic information about the system as well as providing
access to the Setup Wizard and the ability to force a restart of the system.

Cisco SX10 Specifications

General

Maximum Resolution	1920 x 1080
Video Outputs	1 x HDMI
Video Standards	H.264
Audio Standards	AAC-LD
Network Interface	10/100/1000 Ethernet
Frame Rate	60 fps
Network Protocols	HTTP, HTTPS, SSH, Telnet
Audio Outputs	1x 3.5mm stereo
Operating Temperature	0°C
Storage Temperature	-20°C to 60°C
Relative Humidity	10% to 90%