LAB 7B: Wireless
Cisco Unified Communications Technical Training
Page 110 of 171
LAB 7C: Wireless setup wizard with SPA525G Phones
Introduction:
UC520 is part of the SBCS (Smart Business Communications System) family of products. The UC520
has both internal access points on the 8U and 16U models as well as the external AP521 access point.
The Access Points can be configured using the CCA1.9 wireless setup wizard. The wireless setup
wizard will allow a user to configure internal or external access points as well as the SPA525G phones.
Objective:
The objective of this lab is to configure an internal access point and SPA525G phone. The configuration
will be completed using Cisco Configuration Assistant version 1.9 (CCA1.9) or later. At the end of this
lab, a user should be able to configure the SPA525G Wi-Fi IP phones to work in two different reference
design configurations.
Topology:
To Next Page
Loading...
General