LAB 7B: Wireless
LAB 7B: Wireless
Introduction:
UC520 is part of the SBCS (Smart Business Communications System) family of products. The UC500
has both internal access points on the 8U and 16U models as well as the external AP521 access point.
This Access Points can be used for connecting wireless IP Phones such as Cisco 7920G, Cisco 7921G,
Nokia E61i, and Nokia E65i phones.
Objective:
The main objective of this lab is to configure the basic Wireless features. These features will be
configured using Cisco Configuration Assistant (CCA). At the end of this lab, a user should be able to
configure a Wi-Fi IP phone to work with UC500.
Topology:
To Next Page
Loading...