LAB 7B: Wireless
Cisco Unified Communications Technical Training
Page 119 of 171
Enable Wi-Fi on the Spa525 Phones continued.
1) Verify that Wi-Fi mode is enabled (ON).
2) Press the Save softkey to save the configuration.
3) Wait until all SPA525G phones register to the UC500 and display an extension number.
4) Be sure you are only connected to the UC520 or if you have multiple interfaces on your PC
connected at the time your running the labs be sure you can ping both the BVI1 and BVI100
interfaces from the PC running CCA before continuing. You may need to add routes in your
windows command prompt window. Be sure you can ping 192.168.10.1, and 101.1.1.
4. Click Next to continue.