APPENDIX F: Device Manager Cross Launch
Cisco Unified Communications Technical Training
Page 163 of 171
Class of Restrictions (COR)
COR provides a way to deny certain calls based upon the incoming and outgoing settings on dial peers
and ephone-dns. Each dial peer and ephone-dn can have one incoming COR and one outgoing COR.
The incoming COR list indicates the capacity of the dial peer to initiate certain classes of calls.
The outgoing COR list indicates the capacity required for an incoming dial peer to deliver a call via this
outgoing dial peer.
dial-peer cor custom
name internal
name local
name domestic
name international
!
dial-peer cor list call-domestic
member domestic
!
dial-peer cor list user-domestic
member internal
member local
member domestic
!
dial-peer voice 5003 pots
corlist outgoing call-domestic
description ** FXO pots dial-peer **
destination-pattern 91.............
port 0/1/0
!
To Next Page
Loading...
General