LAB 7A: Security on UC500 and SR520
Cisco Unified Communications Technical Training
Page 89 of 171
Creating a Community
To create a community that includes both the Cisco UC500 and the Cisco SR520, do the following:
1 Start Configuration Assistant, and select Create community in the Connect window. Click Connect.
2 In the Create Community window, enter a name for the community.
3 Enter the Cisco SR520 IP address in the Seed IP Address field. Click Start.
4 When prompted, enter the Cisco UC500 and the Cisco SR520 administrator usernames and passwords.
Click OK.
To Next Page
Loading...
General