Send document comments to ucs-docfeedback@cisco.com
28
Cisco UCS B200 Blade Server Installation and Service Note
OL-22473-02
Server Troubleshooting
Figure 16 Installing an Adapter Card
Server Troubleshooting
For general server troubleshooting information, refer to the "Troubleshooting Server Hardware" chapter
of the Cisco UCS Troubleshooting Guide.
Server Configuration
UCS servers are intended to be configured and managed using UCS Manager. Refer to the UCS Manager
Configuration Guide appropriate for your UCS Manager version
Server Specifications
1
2
1
1
1
3
252005
Table 9 Physical Specifications for the Cisco UCS B200 Blade Server
Specification Value
Height 1.95 inches (50 mm)
Width 8.00 inches (203 mm)
Depth 24.4 inches (620 mm)
Weight 13.5 lbs (6.1 kg)
1
1. The system weight listed here is an estimate for a fully configured system and will vary depending on peripheral devices
installed.
To Next Page
Loading...
