Cisco UCS B22 M3 Blade Server
22
CONFIGURING the SERVER
STEP 8 ORDER OPTIONAL INTERNAL USB 2.0 DRIVE
You may order one optional internal USB 2.0 drive. The USB drive ordering information is listed
in
Table 13.
See Figure 6 on page 33 for the location of the USB connector.
Table 13 USB 2.0 Drive
Product ID (PID) PID Description
UCS-USBFLSH-S-4GB 4GB Flash USB Drive (shorter length) for all servers except C260
NOTE: A clearance of 0.950 inches (24.1 mm) is required for the USB device to be
inserted and removed (see the following figure).
NOTE: When the Cisco 4GB USB key is purchased with a server, it is pre-installed
into the internal USB port and held firmly in place with a clip to protect it from
shock and vibration during shipment and transportation. This clip also prevents the
USB key from undergoing shock and vibration during ongoing customer operational
use.
To Next Page
Loading...
