Cisco UCS B22 M3 - Configuring the Server

Cisco UCS B22 M3 Blade Server
CONFIGURING the SERVER
7
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS B22 M3 Blade Server:
■ STEP 1 VERIFY SERVER SKU, page 8
■ STEP 2 CHOOSE CPU(S), page 9
■ STEP 3 CHOOSE MEMORY, page 11
■ STEP 4 CHOOSE HARD DISK DRIVES or SOLID STATE DRIVES (OPTIONAL), page 14
■ STEP 5 CHOOSE ADAPTERS, page 16
■ STEP 6 ORDER A TRUSTED PLATFORM MODULE, page 20
■ STEP 7 ORDER CISCO FLEXIBLE FLASH SECURE DIGITAL CARDS, page 21
■ STEP 8 ORDER OPTIONAL INTERNAL USB 2.0 DRIVE, page 22
■ STEP 9 CHOOSE OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 23
■ STEP 10 CHOOSE OPERATING SYSTEM MEDIA KIT, page 26
■ STEP 11 CHOOSE SERVICE and SUPPORT LEVEL, page 27