Cisco UCS B22 M3 - B22 M3 Configured with 2 Cpus; Connectivity Using the Cisco UCS 2208 XP Fabric Extender

Cisco UCS B22 M3 Blade Server
46
SUPPLEMENTAL MATERIAL
B22 M3 Configured with 2 CPUs
Connectivity using the Cisco UCS 2208XP Fabric Extender
The Cisco UCS 2208XP is the second-generation Fabric Extender, and shares the same form factor as the
current UCS 2100 series. The 2208XP is backwards compatible with the UCS 5108 Blade server chassis.
The options shown in Figure 14 through Figure 18 demonstrate how the server uses these options:
■ Emulex or QLogic I/O adapter to 2208XP
■ VIC 1240 to 2208XP
■ VIC 1240 and Cisco UCS Storage Accelerator to 2208XP
■ VIC 1240 and Emulex or QLogic I/O adapter to 2208XP
■ VIC 1240 and VIC 1280 to 2208XP
In Figure 14, there is no VIC 1240 adapter installed. In this case, a Cisco, Emulex, or QLogic I/O adapter
must be installed in the adapter 2 slot. Ports A and B of the mezzanine adapter connect to the Fabric
Extenders, providing 10 Gbps per port.
Figure 14 Option 1 - Emulex or QLogic I/O Adapter to UCS 2208XP Fabric Extender (no VIC 1240 adapter)