Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
15
Approved Configurations
(1) 1-CPU configurations:
■ Select any one CPU listed in Ta b le 3.
(2) 2-CPU Configurations:
■ Select two identical CPUs from any one of the rows of Ta b l e 3 on page 13.
Caveats
■ You can select either one processor or two identical processors.
■ For optimal performance, select DIMMs with the highest clock speed for a given processor
(see
Ta b l e 3 on page 13). If you select DIMMs whose speeds are lower or higher than that
shown in the tables, suboptimal performance will result.
■ For configurations that use 130 W or 135 W CPUs, the minimum power supply required is
650 W (UCSC-PSU-650W). See STEP 8 ORDER POWER SUPPLY, page 37.
To Next Page
Loading...
