Cisco UCS C220 M3 - Select CPU(s)

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
11
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS C220 M3 High-Density LFF Rack Server:
■ STEP 1 VERIFY SERVER SKU, page 12
■ STEP 2 SELECT CPU(s), page 13
■ STEP 3 SELECT MEMORY, page 16
■ STEP 4 SELECT RAID CONFIGURATION, page 22
■ STEP 5 SELECT HARD DISK DRIVES (HDDs), page 29
■ STEP 6 SELECT PCIe OPTION CARD(s), page 31
■ STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 33
■ STEP 8 ORDER POWER SUPPLY, page 37
■ STEP 9 SELECT AC POWER CORD(s), page 38
■ STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM, page 41
■ STEP 11 ORDER A TRUSTED PLATFORM MODULE (OPTIONAL), page 42
■ STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL), page 43
■ STEP 13 ORDER USB 2.0 DRIVE (OPTIONAL), page 44
■ STEP 14 SELECT OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 45
■ STEP 15 SELECT OPERATING SYSTEM MEDIA KIT, page 48
■ STEP 16 SELECT SERVICE and SUPPORT LEVEL, page 49
■ OPTIONAL STEP - ORDER RACK(s), page 54
■ OPTIONAL STEP - ORDER PDU, page 55