Cisco UCS C220 M3 - Page 79

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
TECHNICAL SPECIFICATIONS
79
The general power specifications for the C220 M3 SFF server 930 W (DC) power supply are listed in Tab l e 43
For configuration-specific power specifications, use the Cisco UCS Power Calculator at this URL:
https://express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx
Table 43 UCS C240 M3 SFF Power Specifications 930 W DC power supply)
Description Specification
Class ■ RSP1
Input
DC input voltage range ■ 40 to 72 VDC (self-ranging, 48 to 60 VDC nominal)
DC line input current (steady state) ■ 23 A peak at 48 VDC
Output
12 V main power output ■ 930 W
12 V standby power output ■ 30 W
Power supply output voltage ■ Main power: 12 VDC
■ Standby power: 12 VDC
Rated output load ■ 2.5 A minimum (within 40 - 72 VDC range)