Cisco UCS S3260 Manual

Not used at this time9Server bay 2
• (Optional)
server node
(Cisco UCS
S3260 M4
shown)
(Optional)
drive
expansion
module
2
Solid state drive bays (up to
four 2.5-inch SAS SSDs)
• SSDs in bays 1 and 2
require a server node in
server bay 1
• SSDs in bays 3 and 4
require a server node in
server bay 2
10System I/O
controller (SIOC)
• SIOC 1 is
required if you
have a server
node in server
bay 1
• SIOC 2 is
required if you
have server
node in server
bay 2
3
Cisco UCS S3260 M4 server
node label (M4 SVRN)
This label identifies
a Cisco UCS S3260
M4 server node. The
Cisco UCS S3260
M3 server node does
not have a label.
Note
11Power supplies
(four, redundant as
2+2)
4
KVM console connector (one
each server node).
Used with a KVM cable that
provides two USB, one VGA,
and one serial connector
1240-Gb SFP+ ports
(two on each SIOC)
5
Server node unit identification
button/LED
13Chassis
Management
Controller (CMS)
Debug Firmware
Utility port (one
each SIOC)
6
Cisco UCS S3260 System Storage Management
4
Cisco UCS S3260 System Storage Management
Storage Server Features and Components Overview

Cisco UCS S3260 Specifications

General

Drive Bays	Up to 56
Maximum Storage Capacity	Up to 600 TB
Power Supply	Up to 4 hot-plug power supplies
Product Type	Storage Server Chassis
Supported Drives	SAS, SATA
Processors	Up to two Intel Xeon Scalable processors
Memory	Up to 1.5 TB DDR4 RAM
Power Supplies	Redundant 80+ Platinum power supplies
Total Drive Bays	56
Management	Cisco UCS Manager
Compatibility	Cisco UCS system
Form Factor	4U rack