Need help?Do you have a question about the Cisco WAP4410N and is the answer not in the manual?
General| Bandwidth | 2.4 GHz |
|---|---|
| Networking standards | - |
| Spread spectrum method | DSSS |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Compliance industry standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Supported data transfer rates | 10/11/54/100/300 Mbit/s |
| Antenna gain level (max) | 2 dBi |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | 64-bit WEP, 128-bit WEP, SSID, WPA, WPA-PSK, WPA2-PSK |
| Power requirements | 12 V DC |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Weight | 390 g |
|---|---|
| Dimensions (WxDxH) | 170 x 41 x 170 mm |
To Next Page
