WAP4410N User Guide 51
Upgrading Firmware
The Access Point's firmware is upgraded through the Web-based Utility’s Administration -
Firmware Upgrade tab. Follow these instructions:
1. Download the firmware upgrade file from the Linksys website, www.linksys.com.
2. Extract the firmware upgrade file on your computer.
3. Open the Access Point’s Web-based Utility.
4. Click the Administration tab.
5. Click the Upgrade Firmware tab.
6. On the Firmware Upgrade screen, enter the location of the firmware upgrade file in the field
provided, or click the Browse button to find the file.
7. Click the Upgrade button, and follow the on-screen instructions.
To Next Page
Loading...
