WAP4410N User Guide 29
The Wireless - VLAN & QoS Tab
Configuring the Wireless-N Access Point
802.1Q VLAN feature is allowing traffic from different sources to be segmented. Combined with
the multiple SSID feature, this provides a powerful tool to control access to your LAN.
VLAN
• Enabled/Disabled VLAN—You can enabled this feature only if the hubs/switches on
your LAN support the VLAN standard.
• Default VLAN ID—Enter the default VLAN ID.
• VLAN Tag—Select Tagged to determine the associated VLAN from the VLAN tag. The
default is Untagged.
• AP Management VLAN—Define the VLAN ID used for management.
• VLAN Tag over WDS—Select Disabled or Enabled as required.
QoS
• VLAN ID—Enter the desired value for the VLAN.
• Priority—Select the desired priority from the list.
• WMM—Wi-Fi Multimedia is a QoS feature defined by WiFi Alliance before IEEE 802.11e
was finalized. Now it is part of IEEE 802.11e. When it is enabled, it provides four priority
queues for different types of traffic. It automatically maps the incoming packets to the
appropriate queues based on QoS settings (in IP or layer 2 header). WMM provides the
capability to prioritize traffic in your environment. The default in Enabled.
Change these settings as described here and click Save Settings to apply your changes, or click
Cancel Changes to cancel your changes. Help information is displayed on the right-hand side
of the screen.
To Next Page
Loading...
