WAP4410N User Guide 6
The LEDs
Getting to Know the Wireless-N Access Point
Getting to Know the Wireless-N Access
Point
This chapter provides you with information about the external characteristics of the Access
Point.
The LEDs
The Access Point's LEDs, where information about network activity is displayed, are located on
the front panel.
Power—Green. Lights up when the Access Point is powered on.
PoE—Green. Lights up when the Access Point is powered through Ethernet cable.
WIRELESS—Green. Lights up when the Access Point is successfully connected to a wireless
device. If the Wireless LED is flashing, the Access Point is actively sending to or receiving data
from a wireless device.
ETHERNET—Green. Lights up when the Access Point is successfully connected to a device
through the Ethernet network port. If the ETHERNET LED is flashing, the Access Point is actively
sending to or receiving data from one of the devices over the Ethernet network port.
To Next Page
Loading...
