Cisco WAP4410N - Page 29

WAP4410N User Guide 24
The Wireless - Wireless Security Tab
Configuring the Wireless-N Access Point
• Key Renewal Timeout.—Enter a Key Renewal Timeout period, which instructs the
Access Point how often it should change the encryption keys. The default is 3600
seconds.
WPA2-Enterprise Mixed
This security mode supports the transition from WPA-Enterprise to WPA2-Enterprise. You can
have client devices that use either WPA-Enterprise or WPA2-Enterprise. The Access Point will
automatically choose the encryption algorithm used by each client device.
• Primary/Backup RADIUS Server—Enter the RADIUS server’s IP address. The Backup
Radius Server will be used only if the primary Radius Server is unavailable.
• Primary/Backup RADIUS Server Port—Enter the port number used by the RADIUS
server. The default is 1812. The Backup Radius Server will be used only if the primary
Radius Server is unavailable.
• Primary/Backup Shared Secret—Enter the Shared Secret key used by the Access Point
and RADIUS server. The Backup Radius Server will be used only if the primary Radius
Server is unavailable.
• WPA Algorithms—Mixed Mode automatically chooses TKIP or AES for data encryption.
• Key Renewal Timeout—Enter a Key Renewal Timeout period, which instructs the
Access Point how often it should change the encryption keys. The default is 3600
seconds.