Cisco Wap581 - Monitor; Dashboard

CHAPTER 10
Monitor
This chapter describes how to display status and statistics of the WAP device. It contains the following topics:
• Dashboard, on page 105
• Single Point Setup Status, on page 109
• Clients, on page 109
• Guests, on page 111
Dashboard
The Dashboard displays the throughput status, and provides you with easy steps to configure or monitor your
network device. This page is updated every 30 seconds.
Connected Clients
The total number of clients currently associated with the WAP device. Click the box, to be redirected to the
Clients page.
Internet/LAN/Wireless
Round icons on the top right of the page, show Internet, LAN and wireless connection status.
• Internet
• Red round — No Internet connection.
• Green round — Internet connection is good.
• LAN
• Red round — No wired connection.
• Green round — Wired connection.
Click the LAN link to view the LAN Status page.
• Wireless
• Red round — All radios are disabled.
Cisco WAP581 Wireless-AC/N Dual Radio Access Point with 2.5GbE LAN Administration Guide
105