Citizen C650 - Setting Alarm Time

57
<Canceling Power Save 1>
Power Save 1 is canceled when power generation resumes as a result of exposing
the solar cell to light.
• The second hand rapidly advances to the current time and begins one-
second interval movement.
• The digital display begins to keep time from the current time simultaneous to
resumption of power generation.
Notes:
• During the time the secondary battery is fully charged and the overcharging
prevention function is activated, the power save function is not activated
even if power generation is interrupted as a result of the solar cell not being
exposed to light. In addition, the power save function is similarly not
activated when the solar cell is exposed to intense light and temporarily
becomes fully charged.
56
CAL No. C650
The watch switches to the Power
Save 2 mode when the Power Save 1
mode continues for 3 days.
The watch switches to the Power
Save 2 mode when the Power Save 1
mode continues for 7 days.
CAL No. C651, C652
(Analog Display)
• The 24 hour hand, hour hand, minute hand, second hand and UTC minute
hand stop at the reference position (12:00).
• The UTC hour hand stops moving immediately.
(Digital Display)
• The digital display remains completely out in continuation from the Power
Save 1 state.
Notes:
• Crown and button operations do not function in any mode.
• The alarm tone does not sound even if it is set.
• The tone indicating that time is up does not sound in the timer mode.
[Power Save 2]