17
Chapter 1 Setup
Connection to Power
1. Check that the power switch to the printer is turned OFF.
2. Connect the connector of the power cord to the power cord
inlet on the printer.
3. Insert the plug of the power cord in the AC outlet.
AC Outlet
Power Cord Inlet
Power Switch
Use an AC outlet that accepts a three-pronged plug. Otherwise, static
electricity may be generated and there will be danger of electric shock.
Caution
Driver Installation
The computer may automatically detect the presence of the new printer
when it is rst started, depending on the computer type, interface and
operating system. Follow any on-screen instruction and also instructions
supplied with any additional CD-ROM included with your printer.
Your supplier will assist you with the correct drivers and software which
are compatible with your particular computer system.
Do not use any voltage other than that displayed. Doing so may lead to
damage or malfunction.
Caution
To Next Page
Loading...
Need help?
General
