Citizen CL-S6621 - Quick Setup of Print Method

44
Chapter 2 Printer Operation
Quick Setup of the Print Method
The print method (thermal transfer method/direct thermal method) can
be set using operation panel in addition to menu setting mode.
Setting method
Each time you push the PAUSE key while pushing the MODE/REPEAT
key, a buzzer sounds and the printer switches between thermal transfer
method and direct thermal method.

If thermal transfer method has been selected, the buzzer sounds once
and the CONDITION LED ashes.
If direct thermal method has been selected, the buzzer sounds twice
and the CONDITION LED ashes.
The change is complete when the CONDITION LED goes out.
Changes will remain in eect even after the power is turned o.
Be sure to always shut o the operation of print before changing a
setting. You cannot change a setting during printing (including pause).
Caution
Menu Setup Mode (p.33)