EasyManuals Logo

Citizen CLP-521 User Manual

Citizen CLP-521
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Prior to operation, read the safety instructions carefully and observe them.
Do not drop or put foreign matter such as clips and pins into the printer. This may cause problems.
Be careful when moving or carrying the printer. Dropping the printer may cause injury or property
damage.
Make sure if you open the top cover, it is opened all the way. If only partially open, the cover could
slam shut, possibly causing injury.
When the cover is open, be careful of the corners of the cover. They could cause injury.
Do not open the printer during printing.
When cleaning the surface of the printer case, do not use the cloth that is soaked in thinner,
trichloroethylene, benzine, ketone or similar chemicals.
Do not use the printer where there is a lot of oil, iron particles, or dust.
Do not spill liquids or spray insecticide on the printer.
Do not jolt or impact to the printer by stepping on, dropping or hitting the printer.
Operate the control panel properly. A careless, rough handling may cause problems or malfunction.
Do not use such sharp-edged tool as a ballpoint pen for operation.
Be careful of the edges of the plates so injury or property damage is possible.
If a problem occurs during printing, stop the printer immediately and unplug the power cord from
the outlet.
When printer trouble occurs, do not try to dissemble it. Instead, consult our service personnel.
Prior to operation, read the safety instructions carefully and observe them.
Do not use or store the printer near fire, excessive moisture, in direct sunlight, near an air conditioner
or heater or other source of unusually high or low temperature or humidity or excessive dust.
Do not place the printer where chemical reactions occur, such as in a laboratory.
Do not place the printer where air is mixed with salt or gas.
The printer must sit on a firm, level surface where there is ample ventilation. Never allow the
printer's air vent to be blocked by a wall or other object.
Do not put anything on the top of printer.
Do not place the printer near a radio or television, and do not use the same wall outlet for the
printer and radio or television. Radio or television reception could be adversely affected.
Do not use a power voltage or frequency other than those specified.
Do not put anything on the power cord or step on it.
Do not drag or carry the printer with the power cord or interface cable.
Avoid plugging the power cord into an outlet with many loads.
Do not bundle the power cord when inserting the plug.
Always grip the plug housing, not the cord, to plug/unplug the power cord.
Make certain the power is turned off before connecting/disconnecting the interface cable.
Avoid lengthening the signal cable or connecting it to any noise-producing device. If it is unavoidable,
use the shielded cable or twisted pair for each signal.
Place the printer near the outlet where the power cord can be unplugged easily to shut off power.
Use the AC outlet that accepts a three-pronged plug. Otherwise, static electricity may be generated
and there will be danger of electric shock.
Caution
Caution
General Precautions
Precautions When Installing the Printer

Table of Contents

Other manuals for Citizen CLP-521

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Citizen CLP-521 and is the answer not in the manual?

Citizen CLP-521 Specifications

General IconGeneral
Print technologyDirect thermal
USB portNo
RS-232 interfaceYes
Optional connectivityEthernet
USB 1.1 ports quantity1
USB 2.0 ports quantity0
Connectivity technologyWired
Power requirements100 - 240V, 50 / 60Hz
Compatible operating systemsWindows 2000/XP
Flash memory2 MB
CertificationUL, C-UL, FCC: class A, CCC, CE Marking
Internal memory8 MB
Number of fonts2
Built-in barcodesPDF417, UPC-A, UPC-E
Built-in processor32 Bit RISC
Mean cycles between failures (MCBF)1000
Core diameter25.4 mm
Media thickness0.0635 - 0.254 mm
Maximum label width104 mm
Maximum label length812 m
Maximum roll diameter127 mm
Supported paper width19.5 - 118 mm
Weight and Dimensions IconWeight and Dimensions
Depth289 mm
Width231 mm
Height186 mm

Related product manuals