To Next Page
J
Jeffrey SmithSep 13, 2025
What to do if printhead is up on Citizen CLP-8301?
- KkthompsonSep 13, 2025
If the printhead is up just before printing with your Citizen Label Maker, set the printhead properly by lowering the printhead lever.
What to do if printhead is up on Citizen CLP-8301?
If the printhead is up just before printing with your Citizen Label Maker, set the printhead properly by lowering the printhead lever.
General| Print Resolution | 300 dpi |
|---|---|
| Display | LCD |
| Print Method | Thermal Transfer |
| Print Speed | Up to 4 ips (101.6 mm/sec) |
| Interfaces | Serial, Parallel, USB |
| Memory | 16 MB SDRAM, 8 MB Flash |
| Power Source | AC Adapter |
