33
——
3.5 Bluetooth USB host interface board
In addition to printer control via Bluetooth communication, Bluetooth USB host inter-
faces can control peripheral devices connected via a USB port.
Connecting a Peripheral Device
1. Turn off the power.
2. Connect the cable of a peripheral device to this port.
CAUTION
A peripheral device cannot be controlled if it is connected to the USB power supply port.
Be sure to connect it to the USB port of the interface board.
Connecting a USB Device
The function assigned to each USB port differs.
Connect the USB device to be connected to the correct place in reference to the fol-
lowing gure.
1. For peripheral device control
Connect a peripheral device.
The connected peripheral device can be controlled.
2. For host computer communication
Connect with a host computer.
The printer and host computer will communicate via USB.
Refer to 3.3 USB Interface
To Next Page
Loading...
